Instruction Manual
26
SNMP Access Group
On this page you can configure SNMPv3 Access Group table. The entry index keys
are
Group Name
,
Security Model
and
Security Level
.
Adding an SNMP Access Group
1.
On the
Access Group Setting
page, enter the following information:
•
Group Name:
A string identifying the group name that this entry should
belong to. The allowed string length is 1 to 16 characters.
•
Security Model
: Indicates the security model that this entry should belong
to. Possible security models are:
•
V1:
Reserved for SNMPv1.
•
V2c:
Reserved for SNMPv2c.
•
V3:
Reserved for SNMPv3 or User-based Security Model (USM).
•
Security Level:
Indicates the security model that this entry should belong
to. The Security Level applies to SNNPv3 only. Possible security models are:
•
Noauth:
None authentication and none privacy security levels are
assigned to the group.
•
Auth:
Authentication and none privacy.
•
Priv:
Authentication and privacy.
•
Read View Name
: Is the name of the view in which you can only see the
contents of the agent. The allowed string length is 1 to 16 characters.
•
Write View Name:
Is the name of the view in which you enter data and
configure the contents of the agent. The allowed string length is 1 to 16
characters.
•
Notify View Name:
Is the name of the view in which you specify a notify,
inform, or trap.
2.
Click on the
Add
button to add the new access group.
Deleting an SNMP Access Group
•
On the
Access Group Setting
page, select the
Delete
button at the bottom of
the page to delete the access group .
•
You can also delete an access group on the
Access Group Status
page, by
