Instruction Manual
129
sender and receiver.
•
Set:
When this option is selected any data segment received that
have a Fin flag will indicate to the receiver that the connection was
terminated.
•
Unset:
When this option is selected data segments received that have
a Fin flag will not terminate the connection.
•
Don't Care:
When this option is selected all data segments are
considered Fin data segments.
•
Type of Service:
Select and ACE service type:
•
Any:
If selected any ACE service type will be used.
•
DSCP:
If selected the
DSCP Value
field will appear, allowing you to enter
a source IP address. The value range is 0 - 63.
•
IP Precedence:
If selected the
IP Precedence
field will appear, allowing
you to enter an IP Precedence value. The value range is 0 - 7.
•
ICMP:
Select and Internet Control Message Protocol (ICMP) for the
corresponding ACE.
•
Any:
No specific ICMP filter is selected.
•
List:
Allows you to select an ICMP filter from the drop-down list.
•
Protocol ID:
Allows you to enter a protocol ID filter for the corresponding
ACE. If selected a Protocol ID field will appear. The protocol ID range is
0 - 255.
•
ICMP Code:
Allows you to specify an ICMP code.
•
Any:
No specific ICMP code is used.
•
User Defined:
Allows you to define the ICMP code.
2.
Click the
Add
button.
Editing/Deleting an IPv4 ACE Table
•
On the
IPv4 Based ACE Table
page. Click the
Edit
button next to the ACL
entry you wish to edit.
- or -
Click on the
Delete
button to delete the corresponding ACL entry.
