Star Micronics IFBD-BE07 User Manual Download Page 65

Page: 65 / 89

IFBD-HE0708 BE07 User’s Manual

6-6

6.3.2. Card Reader/Writer

This product with F/W Ver.5.0.0 and later does not support card reader/writer products. Use the product with Ver. 4.X.X or earlier.

Model

VisualCardOCX1.9.0

Setup StarNIC V3.0

TCP300II

Δ Note*1

○ Note*2

TCP400

Δ Note*1

○ Note*2

Note*1 You must change the #9100 Multi-session setting for IFBD-HE07/08/BE07 to Valid.

To change settings, see sections 3.1.6 HTTP Server, 3.1.7 TELNET Server, and 3.1.8 FTP Server.

Note*2 Uses Windows XP, Vista, 7, 8 and 8.1.

6.3.3. How to Set the IP Address

Setting Tool

Remarks

Windows

Printer Connection Wizard

(6.3.1.1 StarPRNT Inteligence CD)

• You can search for printers that do not have an IP address in environments that do not pass through a

DHCP server, using a combination of IFBD-HE07/HE08/BE07 Ver. 2.2.0 or later and StarPRNT Intelligence

Ver2.0 or later. For earlier versions, you cannot search for printers that do not have an IP address in environ-

ments that do not pass through a DHCP server. Select “Help - Cannot find printer”, and then follow the steps

to setup a temporary IP address.

Star Setting Utility

(6.3.1.2 Star Printer Driver CD)

• If you use Windows Vista or 7 in an environment that does not go through a DHCP server, you cannot

search for printers that have not been set with an IP address.In such cases, set the TCP/IP address on the

printer after reading Guidelines for Using an Ethernet Environment in the printer’s software manual.

• Uses Windows XP, Vista (32 bit) and 7 (32 bit). Windows 64 bit OS is not supported.

Setup StarNIC V3.0

• If you use Windows Vista, 7, 8 or 8.1 in an environment that does not go through a DHCP server, IFBD-

HE07, HE08 or BE07 with Ver2.1.0 or earlier cannot search for printers that have not been set with an IP

address. In such cases, set the TCP/IP address on the printer after reading Guidelines for Using an Ethernet

Environment in the printer’s software manual.

• Uses Windows XP, Vista, 7, 8 and 8.1.

LInux

See the driver manual.

Mac

See the driver manual.

Summary of Contents for IFBD-BE07


























































































Search results

Summary of Contents for IFBD-BE07

Reviews:

Related manuals for IFBD-BE07

Brands by name

Popular brands

Star Micronics IFBD-BE07, User Manual

Search results

Summary of Contents for IFBD-BE07

Reviews:

Related manuals for IFBD-BE07

Brands by name

Popular brands