Star Micronics IFBD-BE07 User Manual Download Page 55

Page: 55 / 89

IFBD-HE0708 BE07 User’s Manual

4-2

Star provides an SDK for use when creating a Web application that uses this function to perform printer control.

The SDK contains JavaScript and HTML samples that perform XML document creation and communication control between a

device and a printer etc.

See the “Star WebPRNT User’s Manual” on the Star homepage for the SDK and the XML element specifications.

Operating environment

-Web browser: HTML 5 support

In accordance with SSL/TLS support, tests were carried out by checking compatibility with F/W Ver4.0.0.

The validated compatibility results tested by Star Micronics Co., Ltd. are shown in the following table. (Results of F/W Ver4.0.0 as of

Dec. 2015)

Conditions of the operation check

• Star WebPRNT SDK operation

Printing and status acquisition work normally. A security error does not appear on the web browser.

• Web configuration operation of NIC

Changing the settings operate normally. A security error does not appear on the web browser.

All results of the operation tests must be OK with both SSL/TLS Enable/Disable.

[

Windows environment

]

WEB browser

Windows7

Windows8.1

Windows10

Firefox (Ver:41.0.1)

Safari (Ver:5.1.7)

Chrome (Ver:45.0.2454.85)

Internet Explorer11 (Ver:11.0.9600.18015)

Microsoft Edge (Ver:20.10240.16384)

OK (*1)

*1) You may need to register the printer's IP address as a "Trusted site" in the web browser settings.

[

Mac environment

]

WEB browser

OS X V10.10.3

Firefox (Ver:40.0.0.3)

Safari (Ver8.0.8)

Chrome (Ver:43.0.2357.130)

[

iOS environment

]

WEB browser

iOS 8.2

iOS 9.02

Safari (Ver5.1.7)

[

Android environment

]

WEB browser

Andriod 4.4.2

Android 6.0

Firefox (Ver:40.0.0.3)

Chrome (Ver:45.0.2454.94)

-: Unconfirmed device

* 2017.8.16: Added information

When performing SSL/TLS communication with Chrome Ver. 58 or later, F/W Ver. 4.1.0 or later, or F/W Ver. 5.0.0 or later, is

required.

Summary of Contents for IFBD-BE07


























































































Search results

Summary of Contents for IFBD-BE07

Reviews:

Related manuals for IFBD-BE07

Brands by name

Popular brands

Star Micronics IFBD-BE07, User Manual

Search results

Summary of Contents for IFBD-BE07

Reviews:

Related manuals for IFBD-BE07

Brands by name

Popular brands