IFBD-HE0708 BE07 User’s Manual
3-35
3.1.12.1. SNMP Configuration Parameters
The following parameters can be set from web configuration or Telnet.
These values can also be checked at self-test print.
Name
Setting range
Default value
Authentic Community
Max. 15 characters (ASCII)
“public”
Trap Community
Max. 15 characters (ASCII, Japanese OK)
“public”
Trap Address (IP)
0.0.0.0 - 255.255.255.255
0.0.0.0
SysContact
Max. 78 characters (ASCII, Japanese OK)
None
SysName
Max. 78 characters (ASCII, Japanese OK)
None
SysLocation
Max. 78 characters (ASCII, Japanese OK)
None
EnableAuthenTrap
1 or 2
2
3.1.12.2. Trap Issue Events
When the EnableAuthenTrap setting for this product is ENABLE,
then this product issues traps to the SNMP manager (trap notification address) when the following 3 events occur.
[Trap issue events]
1. When product was started up
[Generic trap type = 0(Cold Start)]
2. When printer status changed (IEEE1284 port status monitor)
[Generic trap type = 6(Enterprise Specific)]
3. When access by an invalid committee name occurred
[Generic trap type = 4(Authentication Failure)]