Standard SD460 Operator'S Manual Download

Page: 95 / 206

Printing Functions

Format Overlay (Store + Store)

Note

❒

This function can be used only
when the optional HDD board is
installed.

Press the

{

Master Making

}

mode se-

lect key.

Press

[

Edit Image

]

Press

[

Overlay

]

Press

[

Format Overlay (Store + Store)

]

Press

[

Stored File (Page 1)

]

Press the stored file name you
want to select as an original for-
mat, and then press

[

]

Press

[

Stored File

]

Press the stored file name you
want to select as an overlay origi-
nal, and then press

[

]

Press

[

]

twice.

Press the

{

Start

}

key.

Preset Stamp

One of the following three messages
can be stamped on prints with a
frame around it:
CONFIDENTIAL
PRIORITY
PRELIMINARY

Limitation

❒

Only one message can be stamped
at a time.

Note

❒

This function can be used only
when the optional HDD board is
installed.

❒

The message “CONFIDENTIAL”
is selected as a default. You can
change this setting with User
Tools. See p.162 “Stamp Type De-
faults”.

GRSTAM0E

Summary of Contents for SD460















































































































































































































Search results

Summary of Contents for SD460

Reviews:

Related manuals for SD460

Brands by name

Popular brands

Standard SD460, Operator'S Manual

Search results

Summary of Contents for SD460

Reviews:

Related manuals for SD460

Brands by name

Popular brands