Standard SD460 Operator'S Manual Download

Page: 147 / 206

Troubleshooting

134

If you cannot remove the misfed
paper, remove it from the paper
feed tray.

Set the drum unit and close the
front door.

Note

❒

For setting the drum unit, see
p.112 “Changing the Color
Drum Unit”.

To prevent paper misfeeds:

See p.132 ““

+ A” Paper Misfeeds

in the Paper Feed Section”.

“

+ B” Paper or Master

Wrapped Around the Drum

When the master is wrapped around the
drum

Open the front door.

Lower drum unit lock lever (B1).

Take out the drum.

Note

❒

For taking out the drum unit,
see p.112 “Changing the Color
Drum Unit”.

While pressing the drum lock,
grasp the edge of the master (the
white area) and peel it off.

Return the drum lock to its origi-
nal position.

Set the drum unit and close the
front door.

Note

❒

For setting the drum unit, see
p.112 “Changing the Color
Drum Unit”.

Summary of Contents for SD460















































































































































































































Search results

Summary of Contents for SD460

Reviews:

Related manuals for SD460

Brands by name

Popular brands

Standard SD460, Operator'S Manual

Search results

Summary of Contents for SD460

Reviews:

Related manuals for SD460

Brands by name

Popular brands