Standard SD460 Operator'S Manual Download

Page: 172 / 206

Settings You Can Change with User Tools

159

❖

Security Option

You can specify the setting of secu-
rity mode.

Note

❒

Default:

Normal

❒

You have to set a security code
(4 digits) to enable Higher Secu-
rity mode.

❒

When selecting Higher Security
mode, a security mark

ap-

pears on the left side of the date,
in the upper right of the display
panel.

Reference

See p.100 “Security”.

❖

Security Timer

Set the amount of time the machine
waits before switching to the High-
er Security mode.

Note

❒

Default:

Off

❖

Display/Clear/Print Counter per User

Allows you to view and print the
various counters accessed with us-
ers and to set the values to 0.

Note

❒

Press

[

Prev.

]

and

[

Next

]

show all counters.
• Print Counter List

Prints the counter values for
all the users.

• Clear All Counter

Sets the counter value of all
users to 0.

• Clear Per User

Sets the counter value of a se-
lected user to 0.

❖

Program/Change/Delete User Code and
Name

You can register, change, or delete
user codes and names.

Note

❒

Up to 200 user codes (up to 4
digits) can be registered.

Reference

p.164 “User Code”.

❖

Auto Delete File

You can specify whether docu-
ments stored in the machine will
be deleted or not after a specified
period of time.

Note

❒

Default:

❒

If you select

[

Yes

]

, documents

stored subsequently will be de-
leted.

❒

If you select

[

]

, documents will

not be deleted automatically.

❒

If you select

[

Yes

]

, enter a number

of days in the range of 1 to 180.

❖

Delete All Files

All documents stored will be deleted.

Note

❒

Even if a password has been set,
all documents will be deleted.

❒

A confirmation dialog box will
appear. To delete all docu-
ments, select

[

Yes

]

❖

Temporarily Unlock Stored Files

Access to the files will be tempo-
rarily available without entering a
password.

Note

❒

Default:

Do not Unlock

❒

Select

[

Unlock

]

only when you

forget the password. After ac-
cessing the document, be sure to
select

[

Do not Unlock

]

Summary of Contents for SD460















































































































































































































Search results

Summary of Contents for SD460

Reviews:

Related manuals for SD460

Brands by name

Popular brands

Standard SD460, Operator'S Manual

Search results

Summary of Contents for SD460

Reviews:

Related manuals for SD460

Brands by name

Popular brands