Standard SD460, Operator'S Manual

Page: 57 / 206

Basics
44
2
Placing Originals
When using the exposure glass, place
the originals face down.
When using the ADF, place the origi-
nals face up.
Placing Originals on the
Exposure Glass
A
Lift the exposure glass cover.
Note
❒
Be sure to lift the exposure glass
cover more than 30 degrees.
B
Place the original face down on
the exposure glass. The original
should be aligned with the left
scale.
1.
Left scale
2.
Positioning mark
C
Lower the exposure glass cover.
Placing Originals in the Auto
Document Feeder
A
Adjust the guide to the original size.
B
Insert the aligned originals face
up into the ADF.
Note
❒
To avoid originals misfeeding,
fan the originals before placing
them in the ADF.
Limitation
❒
Approximately 50 originals (80
g/m
2
, 20 lb) can be inserted at a
time in the ADF. The first (top)
original will be fed first.
Note
❒
To avoid jamming, fan the orig-
inals before placing them in the
ADF.
❒
The guides must fit snugly against
both sides of the stack.
C
Adjust print settings as necessary,
and then press the
{
Start
}
key.
Note
❒
If the next original has been
placed in the ADF before the
machine stops, that original is
fed automatically.
AJK109S
ACY058S
AJK153S