Standard SD460 Operator'S Manual Download

Page: 141 / 206

Troubleshooting

128

Adding Ink

When

lights, it is time to supply ink.

CAUTION:

Important

❒

Faults may occur if you use ink other than the recommended type.

❒

Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you use only the expendable supplies available
at an authorized dealer.

Note

❒

Be sure to supply ink of the same color as the current drum.

❒

Store ink in a cool, dry place. Do not store ink where it will be exposed to heat
or direct sunlight.

❒

Store ink on a flat surface.

•

Keep the ink or ink container out of reach of children.

•

Be careful not to get ink on your clothes when replacing an ink container. Ink
stains on clothes are hard to remove.

•

When disposing of a used ink container, reattach the cap to prevent ink from
splattering.

•

If your skin comes into contact with ink, wash the affected area thoroughly
with soap and water.

•

If ink comes into contact with your eyes, rinse immediately in running water.
For other symptoms, consult a doctor.

•

If ink is ingested, induce vomiting by drinking a strong saline solution. Con-
sult a doctor immediately.

Summary of Contents for SD460















































































































































































































Search results

Summary of Contents for SD460

Reviews:

Related manuals for SD460

Brands by name

Popular brands

Standard SD460, Operator'S Manual

Search results

Summary of Contents for SD460

Reviews:

Related manuals for SD460

Brands by name

Popular brands