Standard SD460, Operator'S Manual

Page: 42 / 206

Print Paper
29
1
Recommended for the LCOT
*1
When the image position is set to 0 mm (0")
Note
❒
Tray capacity is based on using high quality 80 g/m
2
(20 lb.) paper. The num-
ber of sheets shown is approximate.
Non-recommended Paper
The following types of paper are not recommended for this machine:
• Roughly cut paper
• Paper of different thickness in the same stack
• Envelopes heavier than 85 g/m
2
, 22 lb.
• Folded, curled, creased, or damaged paper
• Damp paper
• Torn paper
• Slippery paper
• Rough paper
• Paper with any kind of coating (such as carbon)
• Short grain paper
• Thin paper that has low stiffness
• Paper that is prone to generate a lot of paper dust
• Grained paper loaded with the direction of the grain perpendicular to the
feed direction
• Certain types of long thin envelopes.
E.g. international mail envelopes
Paper size Paper weight Tray capacity
Metric version Inch version
Maximum: 297
×
432
mm (325
×
447 mm
*1
)
Minimum: 70
×
148 mm
(When the LCIT is in-
stalled: 128
×
182 mm)
Maximum: 11.6"
×
17.0" (12.7"
×
17.5"
*1
)
Minimum: 2.8"
×
5.9"
(When the LCIT is in-
stalled: 5.1"
×
7.1")
47.1 – 209.3 g/m
2
(12.5 – 55.61 lb.)
3000 sheets
(80 g/m
2
, 20 lb.)
Paper stack height:
Less than 345 mm
(13.5")
ZFXX040E