Standard SD460 Operator'S Manual Download

Page: 50 / 206

Printing Preparations

Hold the handle and unfold the
intermediate feeding section of
the LCIT.

Note

❒

Do not release the handle.

Lift the end of the intermediate
feeding section and put it down
placing the wheeled support bar
onto the paper feed tray.

Push the LCIT into the machine
until it clicks.

Plug the LCIT optical cable into
the slot located at the left side of
the back of the machine.

Turning On the Power

Important

❒

Make sure to turn on the power
switch of the LCS first, and then
turn on the main switch of the ma-
chine.

Make sure that the power cord is
firmly plugged into the wall out-
let.

Turn the power switch on.

The green indicator blinks.

ABQ004S

AJK157S

ABQ006S

ACY066S

ABQ011S

Summary of Contents for SD460















































































































































































































Search results

Summary of Contents for SD460

Reviews:

Related manuals for SD460

Brands by name

Popular brands

Standard SD460, Operator'S Manual

Search results

Summary of Contents for SD460

Reviews:

Related manuals for SD460

Brands by name

Popular brands