Standard SD460, Operator'S Manual

Page: 73 / 206

Printing Functions
60
3
A
Place the originals.
B
Press [ Reduce / Enlarge ] .
Note
❒
To select a preset ratio on the
initial display, press the short-
cut Reduce/Enlarge key, and
then proceed to step
E
.
C
Press [ Enlarge ] or [ Reduce ] .
D
Select a ratio, and then press [ OK ] .
E
Press the
{
Start
}
key.
-
Create margin mode
Use Create Margin to reduce the im-
age to 93% of its original size with the
center as reference. You can assign
this function to a shortcut key on the
initial display. By combining it with
the Reduce / Enlarge function, you
can also provide the Reduce / En-
large print with a margin.
Reference
Related initial settings
p.161 “Ratio for Create Margin”
p.163 “Function Key:F1–5”
Zoom
You can change the reproduction ra-
tio in increments of 1%.
Note
❒
You can select a preset ratio close
to the ratio using
[ Reduce ] or [ En-
large ]
, and then adjust it further,
using [
n
] or [
o
] .
A
Place the originals.
B
Press [ Reduce / Enlarge ] .