Standard Horizon CP1000C Owner'S Manual Download Page 39

Page: 39 / 82

GPS chartplotters

Page 41

6. The chartplotter is in Cursor mode, to switch to home mode press

[CLEAR]

to so the

vessel stay in the center of the page.

7. On the CP175C and CP1000C two Soft Keys are also shown that allow you to quickly

switch to the HIGHWAY page or to stop navigation.

8. To STOP Navigation, press the GOTO key an the following WARNING page is shown.

Select Stop and press

[ENTER]

5.5

GOTO MARK

1. Move the ShuttlePoint to an open position (no buoy, warning etc. under the cursor) on

the Chart Page.

2. Press

[GOTO]

to show the GOTO popup window.

3. Move the ShuttlePoint knob to select

MARK

and press

[ENTER]

to show the USER

POINTS.

4. Move the ShuttlePoint to the highlight the desired Mark or Waypoint and press

[GOTO]

5. You will notice a circle is drawn around the Icon Symbol. This means the chartplotter

is now navigating to the point.

6. Press

[CLEAR]

to switch to the Chart page or Highway page to start navigating to the

point.

Summary of Contents for CP1000C



















































































Search results

Summary of Contents for CP1000C

Reviews:

Related manuals for CP1000C

Brands by name

Popular brands

Standard Horizon CP1000C, Owner'S Manual

Search results

Summary of Contents for CP1000C

Reviews:

Related manuals for CP1000C

Brands by name

Popular brands