Standard Horizon CP1000C, Owner'S Manual

Page: 28 / 82

Page 30 GPS chartplotters
5. Press [CLEAR] or move the ShuttlePoint knob to the left to exit the menu and show the
Chart Page.
NOTE
When the chartplotter is in COURSE UP mode a small arrow icon will be shown on the Chart
page indicating the direction of North.
3.2 ADJUSTING THE TIME
The time information supplied by the GPS satellites is in Universal Time Coordinates (UTC
or Greenwich England Mean Time). To change the chartplotter to read the correct time, first
you must figure out the offset and if it is daylight savings time. For example on the West coast
of the United States or Pacific Standard Time the offset needed would be –08:00 or –07:00
for daylight savings time, Eastern Standard Time –05:00 or –04:00 for daylight savings time.
Figure 3.2 - Adjusting Time
NOTE
This map shows offset for standard time. For daylight saving time, subtract one hour from the offset
time.
Figure 3.2a - General Setup/Time Settings menu