Standard Horizon CP1000C, Owner'S Manual

Page: 20 / 82

Page 22 GPS chartplotters
2.11 NMEA DATA PAGE
The NMEA Data Page is very useful to see if a External device (example: Depth Sounder)
is transmitting NMEA sentences to the GPS chartplotter. This page can also be used to see
if the GPS chartplotter NMEA output is being loaded down by a external NMEA device the
GPS chartplotter is connected to.
Scenario:
VHF Radio connected but the radio is not receiving a GPS Position.
Usually the VHF radio will be connected to the Green and Brown wires. To check
to see if the GPS chartplotter is transmitting the sentences:
1. Press
[MENU] and highlight NMEA DISPLAY with the ShuttlePoint knob.
2. Press [ENTER] or move the ShuttlePoint knob to the right and highlight DATA
3. Press [ENTER] or move the ShuttlePoint knob to show the NMEA DATA page.
4. Connect the BLUE Wire on the GPS chartplotter to the junction of the Brown wire and
the VHF wire. The display should look similar to the picture below.
Figure 2.11 - NMEA Data page
2.12 VIDEO INPUT (for CP1000C ONLY)
2.12.0 Video Camera Input
STANDARD HORIZON offers a above deck waterproof color camera called VC10. Up to
2 cameras can be attached to the CP1000C with the rear panel connectors.
Figure 2.12.0 - Color Video Camera
2.12.1 VCR or DVD Input
A VCR or DVD may be connected to either Video1 or Video2 port. The CP1000C does not
have speakers so the audio from the VCR or DVD would have to be routed to a stereo system.