25
IMPORTANT NOTE:
See Appendix “A” for switch settings of all Features listed below.
5.0
MACHINE AND DEVICE FEATURES
Below is the list of features provided by the MC changers, followed with a brief description of their
functions. The factory uses the default settings as listed unless a change in the setting was specified by
our customer. If you choose to change any of the feature settings, please refer to Appendix “A” in the
back of this manual for the step by step procedures. Or if you choose, you may call any of our Factory
Service centers and ask for assistance. You will find our Service Center locations and phone numbers on
the back page of this manual.
5.1
Bill Acceptance and Bill Security (Feature Type = Device)
Default Settings for all bills: Security=High / Accept =Yes
The validation security for each bill denomination can be set HIGH or LOW depending on your security
and acceptance requirements. Higher security requires greater authentication scrutiny and as a result will
result in a lower acceptance rate of genuine bills. In addition, bill acceptance can be set to yes or no for
each denomination. As an example, if you decide not to accept twenty dollar bills, you would select
Security = High and Accept = No.
5.2
Fast Vend Shutoff (Feature Type = Machine)
Factory Default Settings
Time Period = 15 minutes for all bill denominations.
Max Qty of each bill supported (based on country) is:
U.S. currency: $1 = 45, $2 = 45, $5 = 20, $10 = 10, $20 = 5, $50 = 2, $100 = 2.
Canadian currency: $5 = 20, $10 = 10, $20 = 5, $50 = 2, $100 = 2.
Mexican currency: 20 peso = 20, 50 peso = 10, 100 peso = 5, 200 peso = 2, 500 peso = 2.
The Fast Vend Shutoff feature can be used to limit the loss of revenue in the event a thief has devised a
method to successfully remove a bill after the vend has been initiated, and the bill acceptor cannot detect
and report the presence of a string or other manipulation device.
This feature works by allowing the machine owner to establish a normal usage pattern for their individual
site or environment. The usage pattern is based on a normal
quantity
of each bill denomination being
deposited in a certain
Time period
. In other words, if a large
quantity
of $20 bills is deposited in a short
Time Period
, the machine can be set to identify this unusual pattern and shut itself off for a given time
frame thereby preventing further revenue loss.
