30
5.17
Like Value Override (Feature Type = Machine)
Default Settings = NO
Available in software version 01.037 or newer
This feature is used primarily in BX machine models that are not equipped with an EF Module and do not
use the
Forced Dispense Override
feature. Without the
Forced Dispense Override
the same denomination
bill can be paid out as the one that was deposited. Example: $5 bill deposited = $5 bill dispensed. Without
a Forced Dispense, the Make Best Change feature will determine that the best payout (least number of
bills needed) would be a $5 bill. Since this is undesirable, the
Like Value Override
can be set to tell the
machine to use the lower denomination dispenser instead of the Like Vale (same as the deposited amount).
When set to YES a $5 input would pay five items from the $1dispenser.
5.18
Mylar Note Check (Feature Type = Dispenser)
Default Settings = NO
Available in software version 03.085 or newer
This feature is used on boards that are controlling a Fujitsu bill dispenser that is dispensing plastic (mylar)
bills.
5.19
Overpay Timer (Feature Type = Machine)
Default Settings = NO
Available in software version 03.097 or newer
This feature is used to automatically clear an overpay error. Be careful using this in that it can hide a
serious problem. This uses the Error Timeout of the primary dispenser or EF+ if you have one.
5.20
Bonus Tokens (Feature Type = Machine)
Default Settings = 0
Bonus tokens (cards, tickets…) are those that are issued at no cost. In other words, they are given away
as a bonus to the machine user. These are the same tokens given out during the normal machine dispense,
and yet they have no value. A common use of the bonus token feature is to give out extra (bonus) tokens
with larger token purchases.
The Bonus Token for each bill can be from 0 to 99. It is necessary to enter two digits for each bill
denomination. The tens digit for a denomination will be entered first, and in the following step the ones
digit will be entered. The parameter table below is used for both steps.
Note: The
Primary Device
type must be set to TOKEN for the Bonus Token settings to be used.
Bonus Token Example: For a $20 bill deposit you wish to give out 4 bonus (extra) tokens. The value of
the token dispenser was set to 25 cents. The
Make Best Change Feature
will automatically give out 80
tokens. The
Bonus Feature
will then add the additional 4 bonus tokens to the total tokens to be issued for
the $20 deposit. The machine user will receive 84 tokens.
