S
Like Value Override
(The Factory Default Setting for Like Value Override is “NO”).
To make a change to the Like Value Override feature, follow the step by step procedure outlined below.
Note: The five-position switch and red selection button are located on the dispenser control board of
the device marked “Primary”.
IMPORTANT: Please note the original switch settings before starting this procedure. You will need to
return the switches to this original setting to assure proper operation after making any changes. As a
convenience, you can enter these original settings in the diagram to the right by simply
marking an “X” for UP or DOWN on each switch.
1.
Activate the Like Value Override programming mode by setting:
Switch 1–ON; Switch 2-OFF; Switch 3-OFF; Switch 4-ON; Switch 5-ON
2.
Press the red selection button one time.
3.
Advance to the Like Value Override selection step by setting;
Switch 1-ON; Switch 2-OFF; Switch 3-OFF; Switch 4 –OFF; Switch 5-OFF
4.
Press the red selection button Twenty-two times.
5.
Now set switches to desired setting Choice numbers 1 or 2 from the table below.
Example: Set switches to match Choice 2 if you want the Like Value Override set to yes. Once
you’ve made your selection, press the red selection button one time.
6.
End the programming sequence by resetting the switch to their original settings, and then press the
red selection button one time to put the machine back into service.
Example: machine is configured with one $5 dispenser and one $1 dispenser with the default setting a
$5 bill inserted would payout one from the $5 dispenser. When set to YES a $5 input would pay five
items form the $1dispenser.
LIKE VALUE OVERRIDE CHOICES
CHOICE
SETTING
SWITCH POSITIONS
SW2
SW3
SW4
SW5
1
NO
UP
UP
UP
UP
2
YES
DOWN
DOWN
DOWN
UP
12 345
