St. Jude Medical PressureWire Aeris, Instructions For Use Manual

Page: 10 / 192

10
Table 4. Enviromental conditions
Operating, ambient temperature 15°C to 35°C (59°F to 95°F) ) max ± 5°C temperature fluctuation
Operating, relative air humidity 30-75%
Ambient pressure 425-850 mmHg
Transport temperature - 25°C to +60°C (-13°F to +140°F)
Transport relative humidity 10-95%
Table 5. Transmitter function indicators light
Function indicators Explanation
Fast blinking green light Zeroing (initializing)
Green steady light Transmitter on, normal operation
Alternating green/yellow blinking light Stability check failed (pulsatile pressure detected). Rezero
PressureWire at stable zero pressure.
Yellow steady light PressureWire disconnected from transmitter. Reinsert
PressureWire firmly into transmitter.
Yellow blinking light. Error. Possible causes can be that the battery level is too low for
operation or other internal error. Exchange PressureWire.
Table 6. Platforms compatible with PressureWire Aeris
PressureWire ™ Receiver
Ilumien ™
QUANTIEN ™
For other compatible platforms, check with your sales representative.
Compliance with Regulatory Requirements
Guidance and manufacturer’s declaration – electromagnetic emissions
PressureWire system is intended for use in the electromagnetic environment specified below. The
customer or the user of PressureWire system should assure that it is used in such an environment.
Emission test Compliance Electromagnetic environment –
guidance
RF emissions
CISPR 11 Group 1 The PressureWire system uses RF
energy only for its internal function.
Therefore, its RF emissions are very
low and are not likely to cause any
interference in nearby electronic
equipment.