DISASSEMBLY AND ASSEMBLY
Reassembly
Reassembly is almost the opposite process of disassembly.
1. Make sure the LCD Data Cable is connected in the proper orientation to
the LCD and Torque Seal has been applied to either side of the data
cable connector.
Use the following method when connecting the LCD data cable to the
LCD.
B)
Incorrect connection
Stress is dispersed
Base (horizontal film base) is required
Base (horizontal film base) is required
ispersed
Stress is d
A)
Correct connection
2. When mounting the LCD, carefully pass the backlight cables and the
LCD data cable through the openings in the LCD Mounting Bracket.
3. Line up the LCD’s Mounting Holes to the stand-offs.
4. Install the washers and the screws. Do not over tighten the screws at
this point.
3/24/05
Preliminary Release 2-17