DISASSEMBLY AND ASSEMBLY
NO T E
The ‘DG41 LCD Panel requires an Open Frame Inverter
(DMA23058) which is mounted to the backside of the LCD
Mounting Bracket.
The LCD Mounting Bracket is merely resting on top (acting as a lid)
of the Rear Internal Shield Assembly. No tools are required when
removing the LCD Mounting Bracket from the Rear Internal Shield
Assembly.
Removing the ‘DG41
LCD Assembly
(Mounting Bracket)
from the Rear Internal
Shield Assembly
1. Carefully lift off the LCD Mounting Bracket a few inches, as
there is the Touchscreen Sensor Cable, Backlight Cable and
LCD Data Cable attached to the Motherboard.
Carefully lift off
the LCD
Mounting Bracket
a few inches
3/24/05
Preliminary Release 2-11