DISASSEMBLY AND ASSEMBLY
Red Wire
1. Remove Screw
ISIS Detector PCB
Magswipe Reader
ISIS
Emitter PCB
Interface Cable
2. Disconnect
1. Without touching the emitter (emitting diode) and detector
(phototransistor) components (these will either be gold or
silver), carefully grasp the top edges of the emitter and
detector boards and gently slide them (together) upwards
and out of the card guides.
Removing the ISIS
Badge Reader
(Optical Reader)
Care should be taken when handling these boards as the emitter &
detector components have been aligned for optimal performance.
Accidentally shifting these components can cause the reader to not read
the badge cards.
NO T E
2-8 Preliminary Release
3/24/05