DISASSEMBLY AND ASSEMBLY
3. Cut cable tie securing backlight cable
NO T E
7. Carefully turn the LCD Mounting Bracket over, right side up.
Be careful not to touch the LCD’s display surface when turning the LCD
Mounting Bracket over.
8.
Using a Phillips #1 screwdriver remove the 4 screws and
washers that secure the LCD to the LCD Mounting Bracket.
#4-40x1/4 Screw
#4 Star
Washer
5. Cut the cable tie
that is securing the
LCD Data Cable
6. Carefully pull
back the RF
Gasket (do not
completely
remove).
4. Disconnect the
Backlight Cable
9.
Carefully lift off the LCD at the same time slowly passing the
backlight cable and the LCD data cable through the cutouts
in the LCD Mounting Bracket.
3/24/05
Preliminary Release 2-15