20
fitvibe medical Pro
User Manual, Version 01/2004
Increasing the difficulty of an exercise intensifies the exercise and its effects. This can be done in a
variety of ways:
- more difficult starting position,
- progressing from static to dynamic exercises,
- performing the dynamic exercises more rapidly,
- increasing the stretching of the muscles.
4.10 fitvibe smart card system
When using the
fitvibe
smart cards, the active vibration time of the apparatus can be limited, depending
on the number of minutes stored.
Example: If the
fitvibe
smart card has been loaded with 30 min, exercises can be carried out on the
apparatus for a total duration of active vibration periods not exceeding 30 min. Pauses are
not
booked
from the card. The active periods do not have to be used all on the same day.
When the minutes amount on the
fitvibe
smart card has been used up, a new amount can be stored on
the
fitvibe
smart card with the help of the card loading station.
A maximum of 999 min can be loaded on the
fitvibe
smart card
The operation of the card loading station is described in its user instructions.
The smart card reader (33) is located at the right on the outside of the control unit (6). Slide the
fitvibe
smart card in the direction of the arrow into the smart card reader (33) – it clicks lightly into place. The
chip is on the frontside of the
fitvibe
smart card.
4.10.1 Error messages from the smart card reader
Before the start of the active vibration period, the smart card reader compares the time specified for the
sequence of exercises with the time quantity still on the card and writes easily understood messages on
the display in cases of error.
For the case that the time on the card is not sufficient for the selected set of exercises, the apparatus can
nevertheless still be started. The apparatus then works so long as the stored time lasts and then cuts off
the vibration.
4.10.2 Security measures when using the fitvibe smart cards
The smart card reader accepts only personalised
fitvibe
smart cards.
For the security of the apparatus owner, the use of the each
fitvibe
smart card can be secured by its own
secret PIN code.
For this, the same four-digit PIN code must be set up in the fitvibe apparatus and in the card
loading station.
The PIN can be chosen between 0001 and 9999.
The
fitvibe
smart cards, the
fitvibe
apparatus and the card loading stations are delivered with the setting
0000 and can therefore be used immediately without PIN programming.
When you program in a PIN, you
must
ensure that it is
identical
in the card loading station and in the
fitvibe
apparatus.
A chip card introduced in a card writer coded with a PIN-code, will
take over this code definitively!
The
fitvibe device works equal, once coded by a PIN-code,
all non-coded cards will take over this PIN
code definitively.
If you have to change your PIN, then the
fitvibe
smart cards used previously are no longer usable.
Only the manufacturer can neutralize these cards.
Input of a PIN in a card loading station
- see the user instructions for the device -
