16
fitvibe medical Pro
User Manual, Version 01/2004
The end of this manual contains a fold-out diagram of the unit. The numbers used in the following
sections correspond to those in the diagram.
4.2 The “fitvibe medical Pro” Control Buttons
4.2.1 The Combined Rotary/Push Button
The rotary/push button (11) on the control panel is used to control the majority of “fitvibe medical Pro s’
functions. Rotate this button to highlight an option and press it to select the function. By repeatedly
rotating and pressing this button you can highlight and select the various menu options and parameters in
the “fitvibe medical Pro". When you select and option or parameter, the next screen automatically
appears on the display.
4.2.2 " Skip” Button
Using the " skip " button
you can skip exercises in the treatment menu.
4.2.3 "Return to Main Menu” Button
Using the "Return to Main Menu" button
you can go directly to the main menu on the display.
4.2.4 "System Settings” Button
Using the "System Settings" button
you can open the system settings menu. See Section 2.8.
4.2.5 Yellow and Green Indicator Lights
If you are in the middle of programming a treatment session on the "fitvibe medical Pro", the yellow
indicator light (13) beside the start/stop button on the control panel shows that the vibration treatment
cannot be started. The green indicator (14) only lights when the "fitvibe medical Pro" is in exercise mode
and/or vibration treatment can be started.
4.2.6 Start/Stop Buttons
The "fitvibe medical Pro" unit has three start/stop buttons that can be used independent to start and stop
the vibration:
an orange-colored Start/Stop button (3) is located on the control panel below the rotary/push
button (11);
a Start/Stop footswitch (12) is located on the handrail support at the same level as the vibration
plate;
the hand-held remote switch (16) is connected by a cable to the control panel.
You can use any of these buttons to start and stop the vibration from any position.
4.2.7 Quick start
Pushing the start/stop button allows starting the "fitvibe medical Pro" immediately without passing the
main menu.
Therefore you’ll need to push the START/STOP button three times. The "fitvibe medical Pro" will then
start at a frequency of 30 Hz. You can change this frequency during the exercise.
If you want to change the vibrating settings you can do so after the first push using the rotary button
(4.2.1).
4.3 Adjusting the Height of the Handrail
The height of the handrail can be adjusted to suit the length of each individual user or to suit the particular
exercise being carried out. Use the clamp mechanism (25) to adjust the height of the handrail.
