Data di emissione: February, 2016 Revisione: 1 Pag. : 12/48
- Stop the refrigerating (by switching off all the
LED acting on the – button or by pressing the
+button and keep it pressed to switch off the
defrost mode) and the heating system (E switch
in OFF position) and let the machine run with
the only auger activated for ten minutes.
- Remove all the residual product considering
that the hot product could still be at high
temperature.
- Provide yourself with a sanitizer suitable for
plastic, rubber and stainless steel objects
(AMUCHINA®).
IMPORTANT
Carefully follow the mix producer
prescriptions in terms of time and modes
of conservation.
- Remove the cover (fig.12).
- Pour lukewarm water into the bowl (fig.13)
and, after re-positioning the cover, make the
scraper auger rotating for some minutes (all
LED switched off).
NOTE
Each bowl is equipped with a very efficient
safety mechanism, activated when the cover is
lifted, designed to protect the operator. If the
cover is not correctly positioned, the
machine will not work.
- Empty the bowl and repeat the same
operations until the coming out water is clear
(fig.14).
Fig. 12
Fig. 13
Fig. 14
