Data di emissione: February, 2016 Revisione: 1 Pag. : 15/48
Once performed all these cleaning and sanitizing
procedures, it’s possible to reassemble all the
components.
The correct assembly of the device is essential
to prevent leakage of product and damage of
the machine. To assemble the machine you will
need an approved lubricant (such as Vaseline).
Make sure all parts have been washed and
sanitized before assembling. Persons assembling
the machine must first wash and sanitize their
hands and forearms with an approved sanitizer.
- Reassemble the rear gasket respecting the
correct assembling direction as indicated in
figure 22.
- Spread Vaseline on the bell shaped seal
internal surface before reassembling it (fig.23).
- Insert the suction gasket into the auger by
carefully inserting it into its seat (fig. 24).
- Reassemble the mixing unit making sure that
the frontal cylinder perfectly fit inside its
rotating shaft seat (fig.25).
Fig. 22
Fig. 23
Fig. 24
Fig. 25
