Data di emissione: February, 2016 Revisione: 1 Pag. : 22/48
Problema
Possibile causa
Soluzione
The machine does not
heat
The correspondent auger is not
rotating, D switch in OFF position
The heating system is not
activated, E switch in OFF position
Only for NINA3 HOT&COLD, the
heating system is not enabled, A
switch on the right side in OFF
position
L’elemento
riscaldante
non
funziona
Activate the auger switch D
Activate the heating system by moving
the switch E from OFF to ON position
Enable the heating system with the A
switch
Check the heating element electrical
connections and, if disconnected,
reconnect. If still not operating, replace
the heating cylinder
The machine does not
heat and the red light on
the front side is always
ON
The manual regulation thermostat
is faulty
The safety thermostat is faulty
Replace
the
manual
regulation
thermostat
Replace the safety thermostat
