Data di emissione: February, 2016 Revisione: 1 Pag. : 10/48
- In order to activate the refrigerating system in
defrost mode it is necessary to press the –
button an keep it pressed until the first and the
last LED of the scale will turn on.
In order to exit from the defrost mode it is
necessary to press the + button an keep it
pressed until the all the Led will be switched off.
NOTE: when all the LED are switched off the
refrigerating system is not working and the
product is not cooled.
NOTE: when the unit is switched off the
electronic board will keep in memory the last
setting, for this reason the unit will restart in
the same operating mode when switched on
again.
!WARNING!
The refrigerating system is activated when at
least one LED is switched on; in order to avoid
any damage, before activating it, is necessary
to fill up the bowl; failure to do so could damage
the unit.
Important
Do not use the unit with the refrigerating
system activated (this means in both freeze or
defrost mode) with water or sanitizer in the
bowl, the machine will be damaged.
HEATING SIDE FUNCTIONING
- In order to activate the heating system it is
necessary to activate the E switch (fig.10)
considering that if the correspondent auger is
not rotating the heating element will not work.
NOTE: when the heating element is working the
red light F is turned on (fig.10); the heating
system warms up the product until the desired
temperature and keep it at this value with
ON/OFF cycles; for this reason, during the
functioning the light will alternately turn on and
off.
NOTE: the machine is equipped with an internal
thermostat in order to regulate the product final
temperature, the maximum value that is
possible to be set is 80°C.
- Once the desired product consistency is
reached, to dispense product position a cup
under the tap and lower the lever as shown in
figure 11.
Fig. 9
Fig. 10
Fig. 11
