118153-001 Rev. B
31
uX_Manual.doc REV -
6.3
Program mA Setpoint
Description:
The host requests that the firmware change the mA output. The mA/bit
scaling for the argument is model dependent. See the tables in section 8
of this document.
Direction:
Host to supply
Syntax:
<STX><11><,><ARG><,><CSUM><ETX>
Where:
<ARG> = 0 - 4095 in ASCII format
Example:
<STX>11,4095,<CSUM><ETX>
Response:
Success: <STX><11><,><$><,><CSUM><ETX>
Error: <STX><11><,><ARG><,><CSUM><ETX>
where <ARG> = error code
Error Codes TBD, 1=out of range
Summary of Contents for uX SERIES
