118153-001 Rev. B
33
uX_Manual.doc REV -
6.5 Program Filament Current Limit
Description:
The host requests that the firmware change the filament current limit
setpoint. This is the maximum filament current that will be allowed by the
hardware. The A/bit scaling for the argument is model dependent. See the
tables in section 8 of this document.
Direction:
Host to supply
Syntax:
<STX><13><,><ARG><,><CSUM><ETX>
Where:
<ARG> = 0 - 4095 in ASCII format
Example:
<STX>13,4095,<CSUM><ETX>
Response:
Success: <STX><13><,><$><,><CSUM><ETX>
Error: <STX><13><,><ARG><,><CSUM><ETX>
where <ARG> = error code
Error Codes TBD, 1 = out of range
Summary of Contents for uX SERIES
