Spectralink 80-Series Handsets Administration Guide with SRP
1725-86030-000_G.docx
October 2013
34
Without subbands:
When the 802.11 mode has no subbands, the
Transmit Power
list opens when
NavOK
is pressed to set the mode. Only those power levels which
apply to the domain and 802.11 mode are listed. Navigate to the desired level and
press
NavOK
. This sets the transmit power level and exits the
Regulatory Domain
menus. The
Network Setup
menu will again display.
Diagnostics
Run Site Survey
The Site Survey mode is activated by selecting this option. A site survey starts running
immediately upon selecting this option. See the
Diagnostic Tools
section for more information
about site surveys.
Diagnostics Mode
See Chapter 6, section
Diagnostics Enabled
for a detailed explanation of the
Diagnostics
mode
options.
Syslog Mode
See Chapter 6, section
Syslog Mode
for a detailed explanation of the
Syslog
mode options.
Error Handling Mode
The error handling mode determines how the handset will behave when an error occurs. The
Halt on Error
option will cause the handset to stop operating if an error message is received.
Unless the error is a fatal one, normal operation may be resumed by power-cycling the handset.
The
Restart on Error
option will cause the handset to make every effort to reboot quietly and
quickly to standby mode. In either scenario, a call in progress will be lost.
Restart On Error
should be used unless specific error conditions are being investigated.
Error detail may be shown on the display, captured by the syslog server and may also be
available for downloading with the Handset Administration Tool. An error memory dump can be
taken and sent to Customer Service for escalation and analysis.
Restore Defaults
The
Restore Defaults
option will set all user and administrative parameters except
Telephony
Protocol
to their factory defaults.
Demos
The
Graphics Demo
option starts a demonstration of the handset’s OAI graphical capabilities
immediately upon selection.
