Spectralink 80-Series Handsets Administration Guide with SRP
1725-86030-000_G.docx
October 2013
66
Handset Status Messages
Handset status messages provide information about the Spectralink 80-Series Handset’s
communication with the AP and host telephone system. The following table summarizes the
status messages, in alphabetical order.
Message
Description
Action
Download failure icon
Update handset code in the TFTP server
and power cycle the handset.
3 chirps (audio)
Handset is not able to communicate
with the best AP, probably because
that AP has no bandwidth available.
None. This is only a warning, the call will
handoff to the best AP once it becomes
available.
802.1X Failure
Xxxxxxxxxxxx XXX
When WPA2-Enterprise or Cisco
FSR is selected, the handset failed
to connect because the user
credentials are restricted based on
the user account properties. In the
case of EAP-FAST, the PAC ID may
not match the username.
The second line of the error
message contains the twelve digits
of the AP MAC address and three
digits that indicate the error code as
defined in RFC2759.
Verify and resolve if the user account has
any restrictions such password expired,
account restricted/ disabled, or in case of
EAP-FAST, the handset PAC and
username matching the authentication
server.
Address Mismatch
Handset software download files are
incorrect or corrupted.
Download new software from the
Spectralink site per Chapter 8
Software
Maintenance
.
Assoc Failed
xxxxxxxxxxxx
x…x = AP MAC address.
Handset association was refused by
AP; displays MAC of failing AP.
Check handset and AP security settings.
Ensure AP is configured per
Configuration
Note
.
Try another AP.
Assoc Timeout
xxxxxxxxxxxx
x…x = AP MAC address.
Handset did not receive association
response from AP; displays MAC of
failing AP.
Check handset and AP security settings.
Ensure AP is configured per
Configuration
Note
.
Try another AP.
Auth Failed
xxxxxxxxxxxx
x…x = AP MAC address.
Handset authentication was refused
by AP; displays MAC of failing AP.
Check handset and AP security settings.
Ensure AP is configured per
Configuration
Note
.
Try another AP.
Auth Timeout
xxxxxxxxxxxx
x…x = AP MAC address.
Handset did not receive
authentication response from AP;
displays MAC of failing AP.
Check handset and AP security settings.
Ensure AP is configured per
Configuration
Note
.
Try another AP.
Bad Code Type xx
Expected Code Type
yy
xx, yy = software license types
Handset software does not match
current handset license selection.
Download new software from the
Spectralink site per Chapter 8
Software
Maintenance
.
