Spectralink 80-Series Handsets Administration Guide with SRP
1725-86030-000_G.docx
October 2013
27
Note
Follow your dial plan rules when entering the emergency number to be dialed. E.g. if
an outside number is to be dialed and a prefix is required to obtain an outside line,
enter the prefix as part of the emergency number.
Admin Tip
Once an Emergency Number has been entered, it can be modified, but can only be
cleared by restoring the handset to defaults.
Time Zone
Worldwide time zone options are available. Greenwich Mean Time (GMT) is the default.
Daylight Savings
The handset may be adjusted for daylight savings time.
Protected Speed-dial
The protected speed-dial number is designed to be programmed to a number that should be
called in emergency situations. It appears as the first item on the speed-dial list and is specially
marked with a greater-than symbol (>) as the first character in its name. Only one such number
can be programmed Enter the number to be dialed, the name (e.g.
Security
), and scroll to
assign to one key press. The choices for this key press are 1-9, 0, *, #, or ^. The carat
represents the volume up and down buttons. This number must be programmed in every
handset. This setting cannot be modified by the user. This feature is not available in a handset
where the user has disabled
Pre
-
dial
in the
Config
menu
.
Password Enable/Disable/Change
The password option controls access to the
Admin
menu. It is enabled by default with the
password 123456. The
Password
option operates as a toggle between
Enabled
and
Disabled
.
The info line will display the current state. Press
NavOK
to change the password protection
state. To modify the password requirement, the default or previously set password must be
entered to verify the change.
Change Password
will appear only if the password is enabled.
The password is disabled by default. The password must be set in each handset for which
controlled access is desired.
Speakerphone Enable/Disable
The speakerphone may be disabled when quiet handset operation is required. The current
speakerphone setting is shown on the info line. Press
NavOK
to toggle to the alternate setting.
