Spectralink 80-Series Handsets Administration Guide with SRP
1725-86030-000_G.docx
October 2013
49
Where:
•
111111 – the last three octets of the on-air MAC address for a discovered AP.
•
22 – the signal strength for the specified AP.
•
33 – the channel number of the specified AP.
•
444 – the beacon interval configured on the specified AP.
•
Any/MyID – softkey to toggle between “single SSID” and “any SSID” mode.
•
Detl/Smry – softkey to toggle between the multiple AP (summary) display, and the single
(detail) displays for each AP.
The following screen shows how the display would look when there are three APs configured
with an SSID that matches that of the handset. The first has a signal strength of –28 dBm, is
configured on channel 2, with a beacon interval of 100 ms. The second has a signal strength of
–48 dBm, is configured on channel 6, with a beacon interval of 200 ms. The third has a signal
strength of –56 dBm, is configured on channel 11 with a beacon interval of 100 ms.
a b 7 b c 8 - 2 8 0 2 1 0 0
2 a e 5 7 8 - 4 8 0 6 2 0 0
2 a e 5 9 6 - 5 6 1 1 1 0 0
A n y D e t l
When the
Any
SSID mode is selected, the summary display contains the first six characters of
the APs SSID instead of the beacon interval as in the example below.
a b 7 b - 2 8 0 2 A L P H A
2 a e 5 - 4 8 0 6 W S M T E S
2 a e 5 - 5 6 1 1 v o i c e
M y I D
D e t l
In
Detl
(detail) mode the display would appear as follows. The left/right arrow keys will move
between AP indices.
i : b b b b b b s n
c h
b c n
e e e e e e e e e e e
D G H I
r r r r r r r r r r r r r + x x x x
m m m G : g g g g P : p p p p
A n y
S m r y
Where:
•
i – index of selected AP (value will be from 0 to 3 inclusive)
•
bbbbbb – the last three octets of the BSSID for a discovered AP
