Speco N4NRL User Manual Download Page 63

Page: 63 / 77

Device Management

NVR User Manual

You can manually set the system time or synchronize system time with network through NTP.

Manual

: select “Manual” in the “Synchronous” option and then click

after the “System Time” option to set the system time.

NTP

: select “NTP” in the “Synchronous” option and then enter the NTP server.

11.3 Factory Default

Click Start



Settings



System



Maintenance



Factory Default and then click “Reset to factory default” button in the interface to reset to the factory

default settings(check “Reset retain Network Configuration” to retain the network settings).

Note:

Resetting to the factory default settings will not change time zone.

11.4 Device Software Upgrade



Upgrade

You can click Start



Settings



System



Information



Basic to view MCU, kernel version and firmware version and so on. Before upgrade, please get

the upgrade file from your dealer.

The upgrade steps are as follows:

①

Copy the upgrade software into the USB storage device.

②

Insert the USB storage device into the USB interface of the NVR.

③

Click Start



Settings



System



Maintenance



Upgrade to go to “Upgrade” interface. Select the USB device in “Device Name” option and go

to the path where the upgrade software exists. Select the upgrade software and then click “Upgrade”. The system may automatically restart during

upgrading. Please wait for a while and do not power off the NVR during upgrading.



Flash Upgrade

The upgrade steps are as follows:

①

Copy the flash upgrade files into the USB storage device.

②

Insert the USB storage device into the USB interface of the DVR.

③

Restart the DVR. Then the system will automatically upgrade.



Cloud Upgrade

①

Click Start



Settings



System



Maintenance



Cloud Upgrade to go to “Cloud Upgrade” interface.

②

Enable “Auto-check for updates” to check if the current version is the latest one automatically. You can also click “Check for updates” to check

the version by yourself. If it is not the latest one, obtain the latest version from the cloud server and then click “Upgrade”. The system may

automatically restart during upgrading. Please wait for a while and do not power off the device during upgrading.

Note: The file system of the USB mobile device which is used for upgrading, backing up and restoring
should be FAT32 format.

Summary of Contents for N4NRL














































































Search results

Summary of Contents for N4NRL

Reviews:

Related manuals for N4NRL

Brands by name

Popular brands

Speco N4NRL, User Manual

Search results

Summary of Contents for N4NRL

Reviews:

Related manuals for N4NRL

Brands by name

Popular brands