Speco N4NRL User Manual Download Page 22

Page: 22 / 77

Live View Introduction

NVR User Manual

5.2 View Mode

5.2.1 Display Mode

Set different screen modes and cameras’ display sequences as needed and then save the display modes classified by surveillance areas, priorities

and so on. Refer to the picture below. Double click one display mode in the display mode list to view the live images in this mode.



Add Display Mode

Method One:

①

Click “Customize Layout” in the above interface and then set the screen mode.

②

Add the cameras and adjust the cameras’ display sequence as required.

③

Click

under the display mode list and then enter the display mode name in the popup window, click “OK” button to save the current display

mode.

Method Two:

①

Click

Start



Settings



System



Basic



Output Settings to go to the interface and then set the screen mode.

②

Double click the camera or camera group in the list to add them to the selected window.

③

Click

to save the current display mode (refer to 5.2.4 Scheme View In Sequence for detail configurations). The display mode will be saved

and displayed in the display mode list in the live view interface.



Edit Display Mode

Click “Customize Layout” tab in the live view interface and then select one display mode in the list. Click

to edit the display mode name; click

to delete the display mode.

Summary of Contents for N4NRL














































































Search results

Summary of Contents for N4NRL

Reviews:

Related manuals for N4NRL

Brands by name

Popular brands

Speco N4NRL, User Manual

Search results

Summary of Contents for N4NRL

Reviews:

Related manuals for N4NRL

Brands by name

Popular brands