Speco N4NRL User Manual Download Page 51

Page: 51 / 77

Alarm Management

NVR User Manual

⑤

Click “Apply” to save the settings.

⑥

Click “Processing Mode” to go to the alarm handling configuration interface of intrusion detection.

Intrusion Detection Alarm Handling Configuration

①

Click Start



Settings



Alarm



Intelligence Alarm



Intrusion to go to the following interface.

②

Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video” and “E-mail”. The alarm handling setting of intrusion

detection alarm is similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).

③

Click “Apply” to save the settings. You can click “Intrusion Config” to go to the intrusion detection configuration interface.

9.4 Exception Alarm

9.4.1 IPC Offline Settings

①

Click Start



Settings



Alarm



Exception



IPC Offline Settings to go to the interface as shown below.

②

Enable or disable “Snapshot”, “Push”, “Alarm-out”, “Preset”, “Buzzer”, “Pop-up Video”, “Pop-up Message Box” and “E-mail”. The IPC Offline

Settings are similar to that of the sensor alarm (see 9.1 Sensor Alarm for details).

③

Click “Apply” to save the settings.

Summary of Contents for N4NRL














































































Search results

Summary of Contents for N4NRL

Reviews:

Related manuals for N4NRL

Brands by name

Popular brands

Speco N4NRL, User Manual

Search results

Summary of Contents for N4NRL

Reviews:

Related manuals for N4NRL

Brands by name

Popular brands