Sparc Enterprise M3000, Installation Manual

Page: 54 / 68

B-4 SPARC Enterprise M3000 Server Installation Guide • March 2012
B.3.1 Using the
showhardconf
Command
The
showhardconf
command displays the following information about each FRU:
■
Current configuration and status
■
Number of installed FRUs
■
Domain information
■
Name properties of PCIe cards
When you use the
showhardconf
command to show the FRU configuration and
status information and the domain information, it displays any of the status
described below. Beside a unit failed or degraded, placed an asterisk (*) indicating
the locating fault.
■
Faulted: The component is faulty and is not operating.
■
Degraded: The component is operating. However, either an error has been
detected or the component is faulty. As a result, the component might be
operating with reduced functionality or performance.
■
Deconfigured: As a result of another component's faulted or degraded status, the
component is not operating. (The component itself is not faulted or degraded.).
■
Maintenance: The component is under maintenance. A
deletefru
(8),
replacefru
(8), or
addfru
(8) operation is currently underway.
■
Normal: Operating normally.