Sparc Enterprise M3000, Installation Manual

Page: 49 / 68

Appendix A Server Views A-7
The switches on the operator panel include the mode switch for setting the operation
mode and the power button for turning on and off the server.
The information about operator panel switches is described in
TABLE A-3
.
TABLE A-2
LEDs on the Operator Panel
Icon Name Color Description
POWER
LED Green Indicates the server power status.
• On: The power to the server (a domain) is on.
• Off: The power to the server is off.
• Blinking: The server is powered off.
XSCF
XSCF
STANDBY
LED Green Indicates the XSCF unit status.
• On: XSCF unit is functioning normally.
• Off: Input power source is off or is just after
turned on, and XSCF unit is stopped.
• Blinking: System initialization is in progress after
power was turned on.
CHECK
LED Amber Indicates that the server has detected an error. This is
sometimes called a locator.
• On: An error that hinders startup was detected.
• Off: Normal, or power is not being supplied.
• Blinking: Indicates that the unit is a maintenance
target.
TABLE A-3
Switches on the Operator Panel
Switch Name Description of Function
Mode Switch
(key switch) This switch is used to set the operation mode for the server.
Insert the special key that is under the customer's control, to
switch between modes.
Locked Normal operation mode
• The system can be powered on with the power button, but it
cannot be powered off with the power button.
• The key can be pulled out at this key position.
Service Mode for maintenance
• The system can be powered on and off with the power
button.
• The key cannot be pulled out at this key position.
• To stop and maintain the server, set the mode to Service.