Sparc Enterprise M3000, Installation Manual

Page: 22 / 68

3-2 SPARC Enterprise M3000 Server Installation Guide • March 2012
2. Check for a model name and configuration on the product test record.
If any of the items on the list of attachment or the product test record are missing,
incorrect, or damaged, contact your sales representative.
3.2 Mounting the Server in the Equipment
Rack
The M3000 server is mounted in the equipment rack for use. For the mounting
procedure, refer to the
SPARC Enterprise Equipment Rack Mounting Guide.
Caution – Do not grab the handles on the front of the server to lift the server. The
front handles should be used only to insert the server into or pull it out from the
equipment rack. The handles are not designed to support the weight of the server.
3.3 Connecting Cables
This section explains how to connect power cords and the administration console.
3.3.1 Connecting Power Cords
This server is shipped with a grounded type (three-wire type) of power cord.
Always connect the power cords into grounded power outlets.
Caution – The server is designed to work with power systems having a grounded
neutral conductor. Do not connect the equipment into any other type of power
system. Contact the facilities manager or a qualified electrician to determine what
type of power is supplied to your building.
1. An electrician on site must confirm that the input power source satisfies the
electrical power requirements.
For the power requirements, refer to the SPARC Enterprise M3000 Server Site Planning
Guide .