Spacelabs Healthcare elance 5, Service Manual

Page: 34 / 94

Maintenance
3. Place the monitor upright in front of you with the screen facing you.
4. Gently create a small gap at the top right corner at the junction of the front and rear enclosure
with your finger nail or non-metallic tools to prevent scratching the enclosures. Gradually
widen the gap so that it is enough to insert the finger tip.
(Note 1: There are latches along the left and right sides of the front and rear enclosure.
Therefore, it is easier to start separating the front and rear enclosure from the top right corner
as shown.
4-11
There are three latches
along each side of the
monitor.
It is easier to start
separating the front and
rear enclosures from this
area.