Sony VPL-FE100E, Operating Instructions Manual

Page: 29 / 120

29
(GB)
0
INPUT C INPUT B INPUT A VIDEO
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX
+
–
:
OUT PUT
SW NO
RS-232C/422A
REMOTE
RS-232C
RS-422A RS-485 IN
RS-485 OUT
1
Connecting the Switcher
Use the optional PC-3000 Signal Interface Switcher
for connecting various video equipment. The input can
be selected by pressing the SWITCHER/VIDEO
MEMORY/INDEX keys on the Remote Commander.
For selecting the input from the switcher, see page 13 (GB).
Notes
• When you select the input from the switcher, be sure
to set the SWITCHER/VIDEO MEMORY/INDEX
select switch to the SWITCHER position.
• When connecting the switcher, use the wired Remote
Commander. If you use the wireless Remote
Commander, activate the remote control detector on
only one unit of the equipment connected through the
PJ COM connector. For the other equipment, set
SIRCS RECEIVER in the SET SETTING menu to
OFF to deactivate the remote control detectors.
For details, see page 26 (GB).
• After all the connections are complete, attach the
terminator (supplied) to the PJ COM connector on
both the projector and switcher to which nothing is
connected.
Device index number: 01
Rear
to INPUT A
SIC-10 connecting cable
(5BNC
˜
5BNC)
(not supplied)
to OUTPUT
PC-3000 switcher
Computer, etc.
to PJ COM IN
RCC-5G/10G/30G
connecting cable
(not supplied)
to PJ COM OUT
Attach the
supplied
terminator.
to the wall outlet
AC power cord
(supplied)
to AC IN
Signal flow
VCR, etc.
Attach the
terminator
(supplied with
the PC-3000).
Connection e
xamples/Inde
x n
umber setting