19
(GB)
When you input the signal from equipment connected to the PC-3000
signal interface switcher (not supplied), set the SWITCHER/VIDEO
MEMORY/INDEX select switch on the Remote Commander to the
SWITCHER position and press the number keys to select the input.
When multiple switchers are connected, press the SW NO/OFF/
GROUP key, then press the number keys to select the input.
Note
Press the SYS SET key when you make the system connections using
the PC-3000 switcher.
Note on the VPL-FE100E model
The optional IFB-X2000E is required for selecting VIDEO.
3
Press the PATTERN key on the Remote Commander or the control
panel to display the HATCH pattern.
4
Press the FOCUS key then the
V
or
v
key on the Remote Commander
or the control panel to adjust the focus.
“FOCUS” appears on the screen during adjustment.
5
Press the ZOOM key then the
V
or
v
key on the Remote Commander
or the control panel to adjust the picture size.
“ZOOM” appears on the screen during adjustment.
Note
If the optional VPLL-2075, VPLL-2014, VPLL-2009 or VPLL-3050
lens is installed, you cannot adjust the zoom.
6
Press the FOCUS and arrow keys on the Remote Commander or the
control panel to adjust the focus again.
“FOCUS” appears on the screen during adjustment.
(continued)
Summary of Contents for VPL-FE100E
Page 41: ...41 GB ...
Page 81: ...41 FR ...
