Sony VPH-G90E, Service Manual

Page: 18 / 546

1-8
VPH-G90E/G90U/G90M
Overview
15
Overview
Rear
TRIGGER LINK
S VIDEO
OUT IN
C IN Y IN
VIDEO
VIDEO
R-Y/P R
R
B-Y/P B
G B SYNC/HD VD
INPUT A
Y
CONTROL S
PLUG IN POWER
DEVICE INDEX
IN OUT
IN OUT
IN OUT
REMOTE
RS-232C/422A
RS-232C RS-422A
IN OUT PJ COM
STANDBY ON R
5
6
7
1
2
3
4
!¡ !º 9 8
!™ !£ !¢ !∞ !§ !¶
5
ON indicator
When the projector is turned on, this indicator lights in
green.
6
u STANDBY indicator
When the MAIN POWER switch on the projector is
turned ON, this indicator lights in orange, indicating
that the projector can be turned on/off using the remote
commander.
7
Rear remote control detector
8
INPUT A connectors (BNC type)
R/R-Y/P
R
, G/Y, B/B-Y/P
B
, SYNC/HD, VD
connectors: Connect to the outputs of a computer or a
video camera. According to the connected
equipment, the RGB (R, G, B), component (R-Y,
Y, B-Y) or HDTV (P
R
, Y, P
B
) signal is selected.
1
Signal interface board attachment part (INPUT
B)
An optional signal interface board such as IFB-12/12A
and IFB-40 can be attached to this section.
When the IFB-12/12A is attached, the signal input to
the INPUT A connectors can be output from the IFB-
12/12A by setting it to output mode.
2
MAIN POWER switch
3
AC IN socket
Connect the supplied AC power cord.
4
Signal interface board attachment part (INPUT
C)
An optional signal interface board can be attached to
this section.
Notes
• The IFB-40 cannot be attached to INPUT C.
• When the IFB-12/12A is attached, the IFB-12/12A
cannot be set to output mode.
14
Overview
Overview
Location and Function of Controls
Using the handles
Carry the projector with four persons or more by using the front, rear and
side (right and left) handles.
Pull out the front and rear handles or the side handles.
Putting away the handles
Push the handle release lever under each handle. The handle is
automatically retracted.