Sony VPH-G90E, Service Manual

Page: 111 / 546

1-101
VPH-G90E/G90U/G90M
140
Adjustments
Adjustments
Saving the Adjustment Data
List of Resetting Items
Adjustment mode
while resetting
CENTERING Coarse
CENTERING Fine
SIZE Coarse
SIZE Fine
LIN Coarse
LIN Fine
SKEW Coarse
SKEW Fine
BOW Coarse
BOW Fine
KEY
PIN
ZONE
MG FOCUS
BIAS Coarse
BIAS Fine
GAIN
GAMMA
RGB SIZE
RGB SHIFT
BLANKING
CONTRAST
BRIGHT
COLOR
SHARP
HUE
PIC CTRL menu
1) Data of the currently selected input memory for the current input channel in RAM
2) Data for the currently selected screen type and color temperature in RAM
3) Data of the currently selected input memory or video memory in RAM
4) Effective for VIDEO, S-VIDEO, COMPONENT, SDI 4:2:2, IDTV (INT DRC/via IFB-3000) and
HDTV (YP
B
P
R
/GRB) only
Color to be reset
Selected color
Selected color
Selected color
Selected color
Selected color
All colors (RGB)
––
–-
–-
–-
–-
–-
–-
–-
–-
–-
Data to be reset simultaneously
Hc/Hf/Vc/Vf 1)
Hc/Hf/Vc/Vf
1)
(Pro-user mode: Hf/Vf only)
CENTERING/SIZE/LIN/SKEW/BOW
(Hc/Hf/Vc/Vf)
KEY/PIN (all positions)
ZONE (all positions)
CENTERING/SIZE/LIN/SKEW/BOW
(Hc/Hf/Vc/Vf)
KEY/PIN (all positions)
ZONE (all positions)
ZONE (except position 1) 1)
FOCUS, 2/4/6-pole AQP/DQP/AHP/
DHP (all data of all positions)
BIAS Coase, BIAS Fine, GAIN,
GAMMA (Expert mode only)
2)
RGB SIZE (Hc/Hf/Vc/Vf) 3) 4)
RGB SHIFT 3) 4)
BLANKING (TOP/BOTTOM/EFT/
RIGHT)
3) 4)
RGB (including 15 KHz RGB)
CONTRAST 3)
BRIGHT 3)
COLOR 3)
SHARPNESS
3)
HUE 3)
CONTRAST/BRIGHT/COLOR/
SHARPNESS/HUE
3)
Reset mode
Service Data or
Factory Data
Service Data or
Factory Data
Service Data or
Factory Data
Service Data or
Factory Data
Service Data or
Factory Data
Service Data or
Factory Data
Service Data or
Factory Data
Factory Data
Factory Data
Factory Data
80
50
50
50
50
80, 50, 50, 50, 50
Projector mode
Service/Expert
Pro-user/Service/
Expert
Service/Expert
Service/Expert
Pro-user/Service/
Expert
User/Pro-user/
Service/Expert
Others
141
Others
Others
Setting the Index Numbers
When you connect multiple projectors in your system, you have to set the
group index and device index numbers for each projector.
To set the group index number
If you set the same group index number to multiple projectors and
switchers, you can operate them simultaneously, for example, to select the
input, by designating the group index number.
1
Set the projector to the pro-user, service or expert mode.
For details, see “Menu Modes” on page 51.
2
Display the SET SETTING 2 menu, select GROUP INDEX by
pressing the
v or V key, and press the ENTER key.
V I D E O
G R O U P I N D E X : 1
D E V I C E I N D E X : 1
S I R C S R E C E I V E R :
F R O N T & R E A R
L A N G U A G E : E N G L I S H
SEL: SET: ENTER EXIT: MENU
SET
SETTING2
INPUT
INFO.
SET
INFO
P
3
Set a group index number 01 to 99 by pressing the
B
or
b
key, then
press the ENTER key.
G R O U P I N D E X : 1
Group index number
(continued)