Sony VPH-G90E, Service Manual

Page: 164 / 546

2-44 VPH-G90E/G90U/G90M
.
Original Memory
Input memory which stores preset and preadjusted data at shipment.
Serves as the memory read from for new input signals of the unit and in internal oscillation modes such as No-INPUT
and INT.OSC mode : ON.
<Difference with Custom Memory>
1
Identification conditions in identification data of input memory consist of only;
* Input signal type
*
Input frequency (For RGB inputs)
The original memory closest to the input signal based on these conditions is therefore selected and the data is loaded.
2
In all cases, various data is also saved in the original memory.
3
In all cases, the memory frame is not erased.
[Does not apply to automatic erasure when the input memory becomes full with registrations.]
[Does not apply to erasure of “Delete function” of the input memory editing function.]
No. fH (kHz) fV (Hz) Scanning Lines Input Signal Type
00 15.73 60.00 262 VIDEO line (NTSC3.58)
01 15.73 60.00 262 RGB
02 24.83 56.40 440 RGB
03 31.47 59.94 525 RGB
04 48.36 60.00 806 RGB
05 63.98 60.02 1066 RGB
06 75.00 60.00 1250 RGB
07 93.75 75.00 1250 RGB
08 106.25 85.00 1250 RGB
09 126.84 60.00 2114 RGB
10 145.00 60.00 2417 RGB
11 31.47 60.00 525 Double speed line DRC (NTSC 3.58)
12 33.75 60.00 562 HDTV line (YPBPR)
Table 17. Original INPUT MEMORY
. Custom Memory
Input memory for the input signal after shipment.
When the number of input memory registrations become 150 (including the 13 original memories), the memory of the
custom memory area is replaced from the smallest number.