Congratulations on your purchase of this Rocketfish Power Manager
with surge protection and noise filtering.
Your power manager:
• Reduces energy consumption to save environmental resources
and lower your electric bill
• Provides surge protection for sensitive electronic devices
• Incorporates noise filtering to provide
clean
power that will
maximize the performance of your devices.
Features
1 Main power switch/circuit breaker
– controls power to all AC
outlets on the Power Manager, and allows the unit to be reset in
the event of a circuit overload (after the overload condition has
been resolved).
2 6 ft (1.8 m) Soft-Flex™ power cord with right-angle/off-set
plug
– enables placement of the Power Manager in the desired
location. The right-angle plug allows you to place furniture as
close as possible to the wall and not block the second AC outlet.
3 One master outlet
- controls power to the five
master-controlled outlets.
4 Three AC adapter spaced outlets
– accommodate bulky AC
adapter plugs.
5 Five master-controlled outlets
– When the Energy Savings
Switch is ON, these outlets automatically shut down to conserve
energy when the device plugged into the master outlet is
turned off. When the Energy Savings Switch is OFF, these outlets
are always-on.
6 Two always-on outlets
– provide continuous power regardless
of Master/Master-controlled outlets state.
7
Power
LED indicator
- lights to indicate that the power
manager is receiving adequate power from the AC outlet.
8
Protected
LED indicator
- lights when the surge protection
feature is working properly. If this LED does not light or goes out,
the surge protection feature has reached full capacity and can
no longer absorb additional surges and spikes. The power
manager should be replaced if this light goes out.
QUICK SETUP GUIDE
8-outlet Power Manager
RF-HTS210
