32
Chapter 2 Installation
19
Select “2. Shutdown”, then press
the [ENTER] button.
20
When “[ENTER] to activate”
appears, press the [ENTER] button.
The system performs the shutdown
procedure
21
When the message on the right
appears, turn off the library by
pressing the power switch on the
rear.
Connecting a Network Cable
When the network settings are done and the library turned off, connect the
network cable.
1
Connect a network cable from the hub to the Ethernet connector on the
library.
2
Turn on the library power.
Accessing the AIT Library From a Browser
Use a browser to check whether the library is connected to the network.
1
Launch a browser on a client computer.
2
Enter “http://XXX.XXX.XXX.XXX/” in the “Address” or “Location”
field.
For “XXX.XXX.XXX.XXX”, enter the IP address set in the library.
(e.g., 192.168.0.1)
Note
If the IP address assigned by a DHCP server is being used, enter the current
IP address in the “Address” field of the browser. The current IP address can
be checked with [IP Address] of the Network Menu of the control panel.
The top page of the Library Administration Menu appears.
System Down 12:34
1.Reset
2.Shutdown
Shutdown
[ENTER] to activate
Shutdown
*** Wait a minute ***
Ready for shutdown
Press the power
switch on the rear
of the Library
